CNC Router Tips Podcast Season 2 Episode 69: Hold it Right There.

Hold It Right There: CNC Router Tips Podcast Episode 69 Season 2: CNCRT69S2

How will you hold it, right there? In episode 69 of the CNC Router Tips podcast, host Bill Griggs examines Work holding solutions for CNC Router Tables. How you hold your work piece securely to the work table is crucial to your success. Hold It there fast and secure for repeatability.

There are many types of workholding solutions used with CNC Router tables. These solutions include the following:

• Vises: Vises are a versatile workholding option that can clamp workpieces of varying sizes and shapes. They come in various configurations, including standard vises, multi-axis vises, and self-centering vises.
• Clamps: Clamps are a simple and effective workholding solution that can be used to secure workpieces to the CNC router table. They come in different sizes and shapes, such as C-clamps, toggle clamps, and screw clamps.
• Vacuum Tables: Vacuum tables use suction to hold workpieces in place, providing a secure grip without the need for clamps or vises. They are ideal for holding thin or irregularly shaped workpieces and can be customized to fit specific job requirements.
• T-Slot Tables: T-slot tables have a series of slots that allow for the use of T-nuts, which can be used to secure workpieces in place. They are versatile and can accommodate a wide range of workpiece sizes and shapes.
• Fixture Plates: Fixture plates are used to hold multiple workpieces at once, increasing efficiency and productivity. They are typically made of aluminum or steel and can be customized with various hole patterns and clamping options.
• Collet Chucks: Collet chucks are used to hold round or cylindrical workpieces securely in place. They come in various sizes and can be used with different types of collets, including spring collets and dead-length collets.
• Pallet Systems: Pallet systems allow for quick and easy workpiece changes, reducing downtime and increasing efficiency. They consist of a series of pallets that can be loaded with workpieces off the machine, allowing for continuous machining operations.
• Painters Tape and CA Glue provide a surprisingly strong bond that will hold a workpiece to the spoil board.

Live broadcast and free PDF. Register for CNC Side Hustle Roadmap Wednesday March 15, 2023 at 5:00PM Eastern https://cncroutertips.com/roadmap

Bill Griggs contact info:
Twitter: @BillGriggs
Website: https://www.cncroutertips.com
SHOW NOTES: https://www.cncroutertips.com/69s2

Key takeaways:

• Workholding is essential for CNC router Table success.
• Holding multiple parts is more efficient than machining one parts at a time.
• Fixture plates can make work setup easier and more repeatable.
• Vacuum Tables are widely used to hold large parts.
• Give Painters tape and CA Glue a try.
• Live broadcast and free PDF. Register for CNC Side Hustle Roadmap Wednesday March 15, 2023 at 5:00PM Eastern https://cncroutertips.com/roadmap

WEBSITES MENTIONED

Disclosure: Please note that some of the links below are affiliate links, and at no additional cost to you, I will earn a commission if you decide to make a purchase. Please understand that I have experience with all of these companies, books, tools and I...

CNC Router Tips Podcast Season 2 Episode 68: Let Your Ideas Fly.

LET YOUR IDEAS FLY CNC Router Tips Podcast Episode 68 Season 2: CNCRT68S2

In episode 68 of the CNC Router Tips podcast, host Bill Griggs wants you to let your ideas fly. He discusses the versatility of CNC router tables and how they can be used to make a wide variety of products, including gym equipment, backboards for ambulances, and more. The show answers listener questions related to CNC router tables, software, hardware, web hosting, and business. Bill talks about his experience with CNC routers, beginning with making radio control aircraft with laser cut parts before discovering the advantages of using a CNC router to cut thicker pieces of wood. He reflects on how his business has evolved over the years and the importance of adaptability in entrepreneurship. Bill shares a recent experience flying radio control airplanes with a group of fellow hobbyists and how their conversation about needed accessories inspired him to consider using his CNC router to make products for the hobbyist market.

CNC routers are making a splash in the world of RC planes and jets. Bill mentions how CNC Router Tables can be used to create customized carrying cases for the fragile R/C helicopters that enthusiasts use. This leads to a discussion about the benefits of solving one problem and how it can lead to the creation of a whole line of products. One of Bill's favorite YouTuber named Remy RC, uses 3D printed molds and CNC routers to create scale model jets with fantastic results. His results are so good that noted actor, film producer and director, Tyler Perry asked Remy to build a plane for one of his movies and do some conversion work on his models using CNC routers.Key takeaways:

• CNC routers can be used to create customized carrying cases for fragile RC planes and helicopters.
• Solving one problem can lead to the creation of a whole line of products and a brand.
• Remy RC uses 3D printed molds and CNC routers to create scale model jets with fantastic results.
• Tyler Perry asked Remy to build a plane for one of his movies and do some conversion work on his models using CNC routers.
• Live broadcast and free PDF. Register for CNC Side Hustle Roadmap Wednesday March 15, 2023 at 5:00PM Eastern https://cncroutertips.com/roadmap

Bill Griggs contact info:
Twitter: @BillGriggs
Website: https://www.cncroutertips.com
SHOW NOTES: https://www.cncroutertips.com/68s2

WEBSITES MENTIONED

Disclosure: Please note that some of the links below are affiliate links, and at no additional cost to you, I will earn a commission if you decide to make a purchase. Please understand that I have experience with all of these companies, books, tools and I recommend them because they are helpful and useful, not because of the small commissions I make if you decide to buy something. Please do not spend any money on these products unless you feel you need them or that they will help you achieve your goals.


Flying RC planes with Tyler Perry https://www.youtube.com/watch?v=hmyi5khnzd0
At Tyler Perry's RC hangar in Atlanta https://www.youtube.com/watch?v=bh4SFI2Qk1E
Building a Giant RC HONDA JET AH-420 full composite, Part 1
https://www.youtube.com/watch?v=XVjYCGLfAdoTyler Perry https://tylerperry.com/
CNC Side...

CNC Router Tips Podcast Season 2 Episode 67:
New G-Code Shortcuts


New G-Code shortcuts that could save you time and improve your workflow. In this episode of the CNC Router Tips Podcast Bill Griggs shares the many new software tools and developments that could change the CNC Game for good.

Recent advances in computer hardware and software are having a rapid impact on how people use their CNC machines. Newer more advance Stepper and servo motors have made the machines more accurate and dependable. While changes in software have made the machines easier to operate.

No software advance has been as rapid as the introduction of AI artificial Intelligence to generate G-Code. Bill discusses his brief experience with AI generated G-Code and what it could mean to you.

If you would like more information about CNC Router tables you might enjoy joining the #CNC Router Tips Facebook group. This group has over 20,000 active members who share what they know about CNC Router tables and how to use them. If youu would like to check out the group, join us at https://www.facebook.com/groups/cncroutertips

Sample of AI Generated G-Code Query

Prompt: write g-code to move a 1/4" bit from the starting point at x0,y0,z1.0 to a relative position +2" in the X direction and +1" in the Y direction. Plunge the bit down to -.25", and climb cut a two inch square. Retract the tool bit to a safe distance and return to the starting point.


Response:

Assuming that the machine is already set up and the workpiece is properly clamped, here is the G-code to move the 1/4" bit from the starting point at x0,y0,z1.0 to a relative position +2" in the X direction and +1" in the Y direction, plunge the bit down to -.25", climb cut a two-inch square, retract the tool bit to a safe distance and return to the starting point.

G90 ; Absolute positioning
G20 ; Units in inches
G0 X2 Y1 Z1.0 ; Move to the starting point at x0,y0,z1.0 to a relative position +2" in the X direction and +1" in the Y direction
G1 Z-0.25 F5 ; Plunge the bit down to -.25" at a feedrate of 5 inches per minute
G1 X2.5 Y1.5 F10 ; Climb cut a two-inch square at a feedrate of 10 inches per minute
G1 X2 Y1 Z1.0 F5 ; Retract the tool bit to a safe distance and return to the starting point


Please note that the feedrates and tool speeds specified in this code are just examples and may need to be adjusted based on the specific characteristics of the machine and the material being cut.


Bill Griggs contact info:
Twitter: @BillGriggs
Website: https://www.cncroutertips.com
SHOW NOTES: https://www.cncroutertips.com/67s2

WEBSITES MENTIONED

Disclosure: Please note that some of the links below are affiliate links, and at no additional cost to you, I will earn a commission if you decide to make a purchase. Please understand that I have experience with all of these companies, books, tools and I recommend them because they are helpful and useful, not because of the small commissions I make if you decide to buy something. Please do not spend any money on these products unless you feel you need them or that they will help you achieve your goals.


The Makers Guide http://themakersguide.com
#CNC Router Tips https://www.facebook.com/groups/cncroutertips/
Mach3 Software http://www.themakersguide.com/home/products/mach3
ChatGPT https://chat.openai.com/chat
Open AI: https://openai.com/
Shopbot: https://www.shopbottools.com/
CNC Starter Bit set http://cncroutertips.com/bits
VCarve Demo Video http://cncroutertips.com/demo
VCarve Software http://themakersguide.com/vcarve8
Triple Edge Finder http://themakersguide.com
Maker Masters http://makermasters.com
Resources...

CNC Router Tips Podcast Season 2 Episode 1: CNCRT1S2


Welcome to Season 2 of the CNC Router Tips Podcast. In this episode of the CNC Router Tips Podcast Bill Griggs talks about 3 new CNC Software packages that you can use to design programs tp run on your CNC Router Tables.

Bill also discusses what you can expect to hear on the second season of the CNC Route Tips podcast. From new information, techniques and tools you will have many new skills to learn and earn with.

If you would like more information about CNC Router tables you might enjoy joining the #CNC Router Tips Facebook group. This group has over 20,000 active members who share what they know about CNC Router tables and how to use them. If youu would like to check out the group, join us at https://www.facebook.com/groups/cncroutertips



Bill Griggs contact info:
Twitter: @BillGriggs
Website: http://www.cncroutertips.com
SHOW NOTES: http://www.cncroutertips.com/S2E1

WEBSITES MENTIONED

Disclosure: Please note that some of the links below are affiliate links, and at no additional cost to you, I will earn a commission if you decide to make a purchase. Please understand that I have experience with all of these companies, books, tools and I recommend them because they are helpful and useful, not because of the small commissions I make if you decide to buy something. Please do not spend any money on these products unless you feel you need them or that they will help you achieve your goals.




The Makers Guide http://themakersguide.com
#CNC Router Tips https://www.facebook.com/groups/cncroutertips/
Mach3 Software http://www.themakersguide.com/home/products/mach3
CNC Starter Bit set http://cncroutertips.com/bits
VCarve Demo Video http://cncroutertips.com/demo
VCarve Software http://themakersguide.com/vcarve8
Triple Edge Finder http://themakersguide.com
Maker Masters http://makermasters.com
Resources http://cncroutertips.com/resources
Youtube https://www.youtube.com/c/BillGriggs/featured

CENTROIDCNC ACORN UPDATE
CNC Router Tips Podcast Episode 65: CNCRT65


What is the CentroidCNC Acorn? The Acorn is a User Friendly, DIY CNC Control board for Milling Machines, Lathes, Routers Tables and other CNC Machines. In this episode of the CNC Router Tips Podcast Bill Griggs talks about his experiences with the CentroidCNC Acorn.

We discuss the Acorn Updates from the earlier version of the CNC Control board to the present version. Some of those features are more relays, status LEDs and removable header sockets. With CNC12 controller software users can control CNC router tables, Milling machines, lathes and more from the same basic interface with modifications for each type of machine.

Bill Griggs has also been working on converting a Rhino ST-6 CNC lathe to work with a CentroidCNC Acorn with Closed loop Stepper motors.

If you would like more information about CentroidCNC, check out Episode 54. https://www.cncroutertips.com/54

The #CNC Router Tips Facebook group has just passed 19,550 members! If you would like to check out the group, join us at https://www.facebook.com/groups/cncroutertips



Bill Griggs contact info:
Twitter: @BillGriggs
Website: http://www.cncroutertips.com
SHOW NOTES: http://www.cncroutertips.com/65

WEBSITES MENTIONED

Disclosure: Please note that some of the links below are affiliate links, and at no additional cost to you, I will earn a commission if you decide to make a purchase. Please understand that I have experience with all of these companies, books, tools and I recommend them because they are helpful and useful, not because of the small commissions I make if you decide to buy something. Please do not spend any money on these products unless you feel you need them or that they will help you achieve your goals.




CentroidCNC Acorn https://www.centroidcnc.com/centroid_diy/acorn_cnc_controller.html
The Makers Guide http://themakersguide.com
#CNC Router Tips https://www.facebook.com/groups/cncroutertips/
Mach3 Software http://www.themakersguide.com/home/products/mach3
CNC Starter Bit set http://cncroutertips.com/bits
VCarve Demo Video http://cncroutertips.com/demo
VCarve Software http://themakersguide.com/vcarve8
Triple Edge Finder http://themakersguide.com
Maker Masters http://makermasters.com
Resources http://cncroutertips.com/resources
Youtube https://www.youtube.com/c/BillGriggs/featured

CNC ROUTER TIPS IS BACK
CNC Router Tips Podcast Episode 64

CNCRT64: CNC Router Tips Is Back


It has been a while but CNC Router Tips is back. In this episode we discuss the many changes and adventure that we have been working through since the last episode. Bill Griggs went back to school to study Entrepreneurship and grow his CNC Router Table Business. While this has been going on Bill learned  a bunch about things he was doing wrong and how to do things better.

I have been working on converting a Rhino ST-6 CNC lathe to work with a CentroidCNC Acorn with Closed loop Stepper motors. We discussed the CentroidCNC Acorn in Episode 54. 

The #CNC Router Tips Facebook group has just passed 19,550 members! If you would like to check out the group, join us at https://www.facebook.com/groups/cncroutertips



Bill Griggs contact info:
Twitter: @BillGriggs
Website: http://www.cncroutertips.com
SHOW NOTES: http://www.cncroutertips.com/64

WEBSITES MENTIONED

Disclosure: Please note that some of the links below are affiliate links, and at no additional cost to you, I will earn a commission if you decide to make a purchase. Please understand that I have experience with all of these companies, books, tools and I recommend them because they are helpful and useful, not because of the small commissions I make if you decide to buy something. Please do not spend any money on these products unless you feel you need them or that they will help you achieve your goals.




CentroidCNC Acorn https://www.centroidcnc.com/centroid_diy/acorn_cnc_controller.html

Mark Lindsay CNC https://marklindsaycnc.com

SmartScreens https://ngeneyes.com/smartscreen/licensing/

SmartScreens For Mach3 Triple Edge Finder https://www.youtube.com/watch?v=FUlXikOPHbw
The Makers Guide http://themakersguide.com
#CNC Router Tips https://www.facebook.com/groups/cncroutertips/
Mach3 Software http://www.themakersguide.com/home/products/mach3
CNC Starter Bit set http://cncroutertips.com/bits
VCarve Demo Video http://cncroutertips.com/demo
VCarve Software http://themakersguide.com/vcarve8
Triple Edge Finder http://themakersguide.com
Maker Masters http://makermasters.com
Resources http://cncroutertips.com/resources
Youtube http://youtube.com

CNC FOR BEGINNERS WITH MARK LINDSAY
CNC Router Tips Podcast Episode 63

CNCRT63: CNC For Beginners With Mark Lindsay

I think you will enjoy this episode of the CNC Router Tips Podcast because you get to meet Mark Linsay of Mark Lindsay CNC. Mark Lindsay built his first CNC router using plans from Dave Gatton. Since then Mark has grown from a man needing help to a man giving help to the CNC community. His CNC tutorials on his Youtube channel have helped many CNC beginners to get squared away.

Mark Lindsey is the administrator of the CNC For The Beginner group on Facebook where nearly 9000 members meet and share information about CNC routers, milling machines and laser cutters. Members share information, files and opinions with each other.

Mark's interest in CNC router started when he wanted to build a Cigar Box guitar using a CNC router. Mark dived in and began researching how to build a CNC Router Table.




Bill Griggs contact info:
Twitter: @BillGriggs
Website: http://www.cncroutertips.com
SHOW NOTES: http://www.cncroutertips.com/63

WEBSITES MENTIONED

Disclosure: Please note that some of the links below are affiliate links, and at no additional cost to you, I will earn a commission if you decide to make a purchase. Please understand that I have experience with all of these companies, books, tools and I recommend them because they are helpful and useful, not because of the small commissions I make if you decide to buy something. Please do not spend any money on these products unless you feel you need them or that they will help you achieve your goals.



Mark Lindsay CNC https://marklindsaycnc.com

Dave Gatton http://www.davegatton.com

SmartScreens https://ngeneyes.com/smartscreen/licensing/

SmartScreens For Mach3 Triple Edge Finder https://www.youtube.com/watch?v=FUlXikOPHbw

Mach3 Software http://www.themakersguide.com/home/products/mach3

The Makers Guide http://themakersguide.com
#CNC Router Tips https://www.facebook.com/groups/cncroutertips/
Mach3 Software http://www.themakersguide.com/home/products/mach3
CNC Starter Bit set http://cncroutertips.com/bits
VCarve Demo Video http://cncroutertips.com/demo
VCarve Software http://themakersguide.com/vcarve8
Triple Edge Finder http://themakersguide.com
Maker Masters http://makermasters.com
Resources http://cncroutertips.com/resources
Youtube http://youtube.com

Leaving a rating and Review in iTunes makes it easier for people to find this information. Please help us spread this info as widely as possible.

Go to this page. Show more...