Tim Huntzinger, founder of XOTO (pronounced ex-OH-toe), has always been passionate about riding motorcycles. However, as anyone who has ridden on two wheels can testify, cornering on wet, sandy or unstable roads can be very challenging.
Three wheeled trikes may be more stable but they are slow and stiff through corners and let’s face it, it’s way more fun when you can tear through a corner at speed!
Tim decided to put his BFA and MS in Industrial Design to work. The result is a vehicle with two back wheels that lean and adjust as you turn, giving you the stability of a 3-wheeler with the performance and responsiveness of a 2-wheeler. Package this in a “front-wheel” drive electric scooter with a 45-mile range (charged via a standard 110 volt receptacle) and what do you have? XOTO! … Oh and did I mention that this thing is fast!?
All content for Born To Design - SOLIDWORKS Podcast is the property of SOLIDWORKS and is served directly from their servers
with no modification, redirects, or rehosting. The podcast is not affiliated with or endorsed by Podjoint in any way.
Tim Huntzinger, founder of XOTO (pronounced ex-OH-toe), has always been passionate about riding motorcycles. However, as anyone who has ridden on two wheels can testify, cornering on wet, sandy or unstable roads can be very challenging.
Three wheeled trikes may be more stable but they are slow and stiff through corners and let’s face it, it’s way more fun when you can tear through a corner at speed!
Tim decided to put his BFA and MS in Industrial Design to work. The result is a vehicle with two back wheels that lean and adjust as you turn, giving you the stability of a 3-wheeler with the performance and responsiveness of a 2-wheeler. Package this in a “front-wheel” drive electric scooter with a 45-mile range (charged via a standard 110 volt receptacle) and what do you have? XOTO! … Oh and did I mention that this thing is fast!?
42- 3D Printing Expert Shares Tips on Getting Started
Born To Design - SOLIDWORKS Podcast
23 minutes 53 seconds
3 years ago
42- 3D Printing Expert Shares Tips on Getting Started
Interview with Kirby Downey, a designer, Maker, builder, community leader, 3D Printing expert, AND a key member of the SOLIDWORKS community. Kirby shares his advice and knowledge on getting started in 3D printing, along with many tips and insights for Makers, DIY'ers, and hobbyists.
Born To Design - SOLIDWORKS Podcast
Tim Huntzinger, founder of XOTO (pronounced ex-OH-toe), has always been passionate about riding motorcycles. However, as anyone who has ridden on two wheels can testify, cornering on wet, sandy or unstable roads can be very challenging.
Three wheeled trikes may be more stable but they are slow and stiff through corners and let’s face it, it’s way more fun when you can tear through a corner at speed!
Tim decided to put his BFA and MS in Industrial Design to work. The result is a vehicle with two back wheels that lean and adjust as you turn, giving you the stability of a 3-wheeler with the performance and responsiveness of a 2-wheeler. Package this in a “front-wheel” drive electric scooter with a 45-mile range (charged via a standard 110 volt receptacle) and what do you have? XOTO! … Oh and did I mention that this thing is fast!?
