In this episode, Mike, Paul, and Colleen discuss unnecessary maintenance, lean of peak, and flaming exhausts! Email podcasts@aopa.org for a chance to get on the show. Join the world's largest aviation community at aopa.org/join Full episode notes below: Mitchell has a Cessna 185 and he's wondering if it's smart to change out the rotocoils on his engine at some pre-determined point in order to avoid uneven heat patterns on his exhaust valves. Paul, despite having done this, advises him to borescope, and only change when he sees an uneven heat pattern. Since Mitchell already borescopes often, Paul thinks he'll catch a faulty rotocoil quickly. Mike suggests that Mitchell could hit the coil with a mallet and if it doesn't turn to change it. Regardless of the test or monitoring method Mitchell chooses, they agree it's unnecessary to change the springs pre-emptively. Doug has some questions about lean of peak. Specifically, he's wondering why his EGT spread is so large when his GAMI spread is only .2 gallons an hour. The hosts remind him that EGT only matters as a way to identify peak. Otherwise the relative and absolute numbers are meaningless. The big gap in EGT and CHT numbers often comes down to cooling inefficiencies, according to Mike. If the numbers indicated that the cylinders were making differential power, Doug would feel the engine roughness. So the hosts think he's doing just fine. Adam wants to know if he can use an automotive alternator in his Cessna 172 under the new VARMA policy. The policy allows for part substitutions when no aviation parts are commercially available. Since 172 alternators are available, he must use one of those. The hosts then discuss what makes an aviation alternator different from an automotive version since Cessna and Piper use GM and Ford alternators. Paul and Colleen focus on the brushes, which are different, and ours turn the opposite direction, which would require a different pully. Although they agree an owner could bring an aviation alternator to an automotive rebuild shop with aviation parts, they recommend against a straight automotive version. Mark has a Cherokee 235 and he likes to take videos of his flights in order to critique his skills. One one night flight he saw flames coming out of his exhaust, which he obviously found alarming. The hosts put his mind at ease, telling him it's a natural by-product of the combustion process, and simply represents the power his engine is making. But they dig further to find out two important points. First, Mark doesn't have a flame cone on his exhaust. If he did, the flames probably wouldn't be visible. And two, this only happens when he's lean of peak. This intrigues Mike because it's evidence of a slower combustion process that's known to happen during lean of peak. He surmises that because the process is longer, but the rpm consistent, combustion isn't complete when the valve opens, which is why Mark only sees the flame.